Relocate I/Os - GAL GALaxy eHydro Manual

GALaxy eHydro Elevator Controller

4.10 Relocate I/Os

Special Relocation I/O's are located on the Machine Room CAN bus, the Car Top CAN bus and the
Group CAN bus. Each CAN bus has three inputs and three outputs for this purpose and are named as
follows:
MRCAN
Inputs
MSPI1
MSPI1
MSPI3
Table 4-3: I/O Relocation Table
The locations of these I/O are preset in the io.dat file and can be viewed on the diagnostic I/O display or
on the board electronic ink label.
CTCAN
Outputs Inputs
MSPO1 CSPI1
MSPO2 CSPI2
MDPO3 CSPI3
Section 4 - Troubleshooting
GRCAN
Outputs Inputs
CSPO1 GSPI1
CSPO2 GSPI2
CSPO3 GSPI3
Outputs
GSPO1
GSPO2
GSPO3
4-12