GAL GALaxy eHydro Manual page 74

GALaxy eHydro Elevator Controller
5.2.1.2 Car Call Popup Display
From any screen on the Elevator Status display, hitting Enter cause a Car Call Popup display to
appear. Use the Up and Down buttons to select the desired car call and then press Enter to activate
the call. Use the Mode button to exit the Car Call Popup display without entering a call.
5.2.1.3 Trace Popup Display
To enter the Trace Popup display press and hold the ENTER button and then press the MODE button.
The Trace Popup display allows the user to either stop/start the trace buffer or to exit the Elevator
Status Display. To stop the trace buffer, press ENTER and then Mode for the Trace Popup window
and then press ENTER to stop the trace. After the trace buffer is stopped, the Elevator Status display
becomes the Trace Display. See the next section on how to navigate the Trace Display. To restart the
trace buffer, press ENTER and then MODE button to view the Trace Popup display and then press
ENTER to start the trace.
Figure 5-6: Stop Trace Popup Display
Figure 5-5: Car Call Popup Display
Section 5 – LCD Interface
Figure 5-7: Start Trace Popup Display
5-10