Storing Any New File - Siemens SINUMERIK 840D sl Turning Operating Manual
Hide thumbs
Also See for SINUMERIK 840D sl Turning:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Procedure
14.4.6
Storing any new file
In each directory or subdirectory you can create a file in any format that you specify.
Note
File extensions
In the NC memory, the extension must have 3 characters, and DIR or WPD are not permitted.
In the NC memory, you can create the following file types under a workpiece using the "Any"
softkey.
Turning
Operating Manual, 06/2019, A5E44903486B AB
14.4 Creating a directory / program / job list / program list
1.
Select the "Program manager" operating area.
2.
Select the desired storage location and position the cursor on the folder
in which you would like to store the program.
3.
Press the "New" softkey.
4.
Press the "ShopTurn" softkey.
The "New Step Sequence Program" window opens.
The "ShopTurn" type is specified.
5th
Enter the desired program name and press the "OK" softkey.
Managing programs
789
Advertisement
Table of Contents
