Siemens SINUMERIK 840D sl Turning Operating Manual page 333

7. Stock removal (finishing)
Turning
Operating Manual, 06/2019, A5E44903486B AB
T Roughing tool_55 D1
3. Enter the following parameters:
Machining
Machining direction
Position
Machining direction
D 2 inc
Cutting depth
UX
UZ
DI
Relief cuts
FR
Set machining area limits No
4. Press the "Accept" softkey.
1. Press the "Cont. turn." and "Stock removal" softkeys.
The "Stock Removal" input window opens.
2. Enter the following technology parameters:
T Finishing tool_D1
3. Enter the following parameters:
Machining
Machining direction
Position
Machining direction
Allowance
Relief cuts
Set machining area limits No
4. Press the "Accept" softkey.
Creating a ShopTurn program
9.19 Example: Standard machining
F 0.35 mm/rev V 400 m/min
Roughing (∇)
Longitudinal
outside
0.4 inc
0.2 inc
0
Yes
0.200 mm/rev
F 0.1 mm/rev V 450 m/min
Finishing (∇∇∇)
Longitudinal
outside
(from the face to the rear side)
No
Yes
333