Managing programs
12.4 Creating a directory/program/job list/program list
12.4.4
Storing any new file
In each directory or subdirectory you can create a file in any format that you specify.
Note
File extensions
In the NC memory, the extension must have 3 characters, and DIR or WPD are not permitted.
In the NC memory, you can create the following file types under a workpiece using the "Any"
softkey.
272
The "New G Code Program" window appears.
4.
If necessary, select a template if any are available.
5.
Select the file type (MPF or SPF).
If you are in the NC memory and have selected the file "Subprograms"
or "Part programs", you can create only one subprogram (SPF) or main
program (MPF) respectively.
6.
Enter the desired program name and press the "OK" softkey.
Program names may be a maximum of 24 characters in length.
You can use all letters (with the exception of special characters, language-
specific special characters, Asian or Cyrillic characters), numbers and
underscores (_). The program type is appropriately specified.
Operating Manual, 05/2017, A5E40868517
Universal