Saving The Dxf File - Siemens SINUMERIK 840D sl Turning Operating Manual
Hide thumbs
Also See for SINUMERIK 840D sl Turning:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Machining the workpiece
6.11 Working with DXF files
Delete element
6.11.3.6
Saving the DXF file
You can save DXF files that you have reduced and edited.
Requirement
The DXF file is open in the editor.
Procedure
- OR -
198
9.
Press the "Arrow right", "Arrow left", "Arrow up" or "Arrow down" softkey
to move the selection tool.
- OR -
10.
Press the "Element delete" softkey, and using the selection tool, select
the element that you wish to delete.
11.
Press "OK".
1.
Reduce file according to your requirements and/or select the working
areas.
2.
Press the "Back" and ">>" softkeys.
3.
Press the "Save DXF" softkey.
4.
Enter the required name in the "Save DXF Data" window and press "OK".
The "Save As" window opens.
5.
Select the required storage location.
6.
If required, press the "New directory" softkey, enter the required name in
the "New Directory" window and press the "OK" softkey to create a di‐
rectory.
7.
Press the "OK" softkey.
Operating Manual, 06/2019, A5E44903486B AB
Turning
Advertisement
Table of Contents
