Programming Retraction To Tool Change Point - Siemens SINUMERIK 840D sl Turning Operating Manual
Hide thumbs
Also See for SINUMERIK 840D sl Turning:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Creating a ShopTurn program
9.17 Programming retraction to tool change point
9.17
Programming retraction to tool change point
You can approach the tool change point directly using the "Tool change point" softkey.
The retraction planes are taken into account. This makes good sense when moving the tool to
a "safe" position, for example.
Procedure
Parameter
Retraction to tool
change point
324
1.
The ShopTurn program to be processed has been created and you are
in the editor.
2.
Press the menu forward key and the "Straight Circle" softkey.
3.
Press the "Tool change point" softkey.
The "Tool change point" window opens.
4.
Press the "Accept" softkey in order to approach the tool change point
directly.
Description
The tool change point is automatically approached.
Operating Manual, 06/2019, A5E44903486B AB
Unit
Turning
Advertisement
Table of Contents
