Icon/
Marking
Green frame
Magazine/location number
Green double arrow
Gray double arrow
Red "X"
Procedure
See also
Displaying tool details (Page 753)
Changing the cutting edge position or tool type (Page 762)
13.5.1
Additional data
The following tool types require geometry data that is not included in the tool list display.
Tool types with additional geometry data
Tool type
111 Conical ballhead cutter
121 End mill with corner rounding Corner radius
130 Angle head cutter
Turning
Operating Manual, 06/2019, A5E44903486B AB
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1.
Select the "Parameter" operating area.
2.
Press the "Tool list" softkey.
The "Tool List" window opens.
Meaning
The tool is preselected.
The magazine location is positioned at the change po‐
sition.
The magazine location is positioned at the loading po‐
sition.
The magazine location is disabled.
Additional parameters
Corner radius
Geometry length (length X, length Y, length Z)
Wear length (Δ length X, Δ length Y, Δ length Z)
Adapter length (length X, length Y, length Z)
V (direction vector 1 - 6)
Vector X, vector Y, vector Z
Tool management
13.5 Tool list
731