Siemens SINUMERIK 840D sl Turning Operating Manual page 567

Polar starting point
parameters
Machining
surface
(only for ShopTurn)
PL
(only for G code)
ϕ
(only ShopTurn)
G17 G19
or or
face C/Y/B peripheral
surface C/Y
X Y
Y Z
X Y
Y Z
Turning
Operating Manual, 06/2019, A5E44903486B AB
1. Press the "Pole" softkey.
2. Enter the pole position in Cartesian coordinates.
3. Enter the starting point for the contour in polar coordinates.
4. Enter any additional commands in G code format, as required.
5. Press the "Accept" softkey.
6. Enter the individual contour elements.
Description
● Face C
● Face Y
● Face B
● Peripheral surface C
● Peripheral surface Y
Machining plane
● G17 (XY)
● G19 (YZ)
Cylinder diameter
(only peripheral surface C)
Cartesian:
Starting point X or Y (abs)
Starting point Y or Z (abs)
Polar:
Position pole (abs)
Position pole (abs)
Programming technology functions (cycles)
10.5 Contour milling
Unit
mm
mm
mm
mm
mm
567