Siemens SINUMERIK 840D sl Turning Operating Manual page 561

Mirror writing
You can engrave the text mirrored on the workpiece.
Full circle
If you want to distribute the characters evenly around a full circle, enter the arc angle α2=360°.
The cycle then distributes the characters evenly around the full circle.
Parameters, G code program
PL Machining plane
Milling direction
RP Retraction plane
SC Safety clearance
F Feedrate
Parameter Description
FZ Depth infeed rate
(only for G code)
FZ Depth infeed rate
(only for Shop‐
Turn)
Machining
● Face C
surface
● Face Y
● Peripheral surface C
● Peripheral surface Y
(only for Shop‐
Turn)
Position
● At the front (face)
● At the rear (face)
● Outside (peripheral surface)
(only for Shop‐
● Inside (peripheral surface)
Turn)
Clamp/release spindle (only for end face Y/peripheral surface Y)
The function must be set up by the machine manufacturer.
(only for Shop‐
Turn)
Alignment
●
●
●
Turning
Operating Manual, 06/2019, A5E44903486B AB
mm
mm
mm/min
(linear alignment)
(curved alignment)
(curved alignment)
Programming technology functions (cycles)
Parameters, ShopTurn program
T Tool name
D Cutting edge number
F Feedrate
S / V Spindle speed or constant cutting
rate
10.4 Milling
mm/min
mm/tooth
rpm
m/min
Unit
*
mm/min
mm/tooth
561