Multi-Edge (Cycle79) - Siemens SINUMERIK 840D sl Turning Operating Manual

Parameter Description
DZ Maximum depth infeed – (only for ∇ and ∇∇∇)
UXY Plane finishing allowance for the length (L) and width (W) of the rectangular spigot.
Smaller rectangular spigot dimensions are obtained by calling the cycle again and pro‐
gramming it with a lower finishing allowance.
- (only for ∇ and ∇∇∇)
UZ Depth finishing allowance (tool axis) - (only for ∇ and ∇∇∇)
FS Chamfer width for chamfering - (for chamfering only)
ZFS Insertion depth of tool tip (abs and inc) - (for chamfering only)
(ZFS for machining surface, face C/Y or XFS for peripheral surface C/Y)
* Unit of feedrate as programmed before the cycle call
Hidden parameters
The following parameters are hidden. They are pre-assigned fixed values or values that can be
adjusted using setting data.
Parameter Description
PL (only for G code) Machining plane
SC (only for G Safety clearance
code)
Machining Mill circular spigot at the programmed position (X0, Y0, Z0).
position
10.4.6

Multi-edge (CYCLE79)

Function
You can mill a multi-edge with any number of edges with the "Multi-edge" cycle.
You can select from the following shapes with or without a corner radius or chamfer:
Turning
Operating Manual, 06/2019, A5E44903486B AB
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Programming technology functions (cycles)
Value Can be set in SD
Defined in MD
52005
1 mm
Single posi‐
tion
10.4 Milling
mm
mm
mm
mm
mm
x
519