Siemens SINUMERIK 840D sl Turning Operating Manual page 90

Multitouch operation with SINUMERIK Operate
3.6 SINUMERIK Operate Display Manager (840D sl only)
Operator control
...
90
Function
4-display areas
● SINUMERIK Operate (with function block)
● Widget area
● Applications area (PDF, virtual keyboard)
● Area with virtual keyboard
Mirroring display areas
Mirrors the selected arrangement of the display areas.
Navigating in SINUMERIK Operate
Tap on the corresponding icon to directly open the desired operating area.
Widgets
The following widgets are available by default:
● Actual values (Page 81)
● Zero point (Page 82)
● Tool (Page 83)
● Axle load (Page 83)
● Alarms (Page 82)
● Program runtime (Page 84)
● Service life (Page 84)
● NC/PLC variables (Page 82)
PDF
Opens the PDF stored here.
The following functions are available in the PDF display:
● Open (<CTRL> + <O>)
● Mark (<CTRL> + <A>)
● Copy (<CTRL> + <C>)
● Go to (<CTRL> + <G>)
● Search (<CTRL> + <F>)
● Display and hide bookmarks (<CTRL> + <B>)
Alternatively, use the PDF display via the animated toolbar at the top left.
You optimize the read view using the following finger gestures:
● Double tap: Adapt width:
● <CTRL> + double tap: Adapt height:
Operating Manual, 06/2019, A5E44903486B AB
Turning