Selecting A Program - Siemens SINUMERIK 840D sl Turning Operating Manual
Hide thumbs
Also See for SINUMERIK 840D sl Turning:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
6.2
Selecting a program
Procedure
Turning
Operating Manual, 06/2019, A5E44903486B AB
1.
Select the "Program Manager" operating area.
The directory overview is opened.
2.
Select the location where the program is archived (e.g. "NC")
3.
Place the cursor on the directory containing the program that you want to
select.
4.
Press the <INPUT> key.
- OR -
Press the <Right cursor> key.
The directory contents are displayed.
5.
Place the cursor on the desired program.
6.
Press the "Select" softkey.
When the program has been successfully selected, an automatic
changeover to the "Machine" operating area occurs.
Machining the workpiece
6.2 Selecting a program
155
Advertisement
Table of Contents
