Tool Selection For The Manual Mode - Siemens SINUMERIK 840D sl Turning Operating Manual

Working with a B axis (only 840D sl)

17.7 Tool selection for the manual mode

17.7 Tool selection for the manual mode
For the preparatory actions in the manual mode, tool selection and spindle control are both
performed centrally in the T, S, M window.
Figure 17-1
Procedure
See also
Selecting a tool and spindle (Page 138)
886
TSM window for the B and C axis
Aligning the milling and turning tool with β angle:
Press the <SELECT> key and select
● 0° or
● 90° or
● Value entry box to freely enter the angle.
Aligning the turning tool with γ angle:
Press the <SELECT> key and select
● 0°
● 180°
● Value entry box to freely enter the angle.
Operating Manual, 06/2019, A5E44903486B AB
Turning