Siemens SINUMERIK 840D sl Turning Operating Manual page 598

Programming technology functions (cycles)
10.5 Contour milling
Procedure
Parameters in the "Input complete" mode
G code program parameters
Input
PRG
● Name of the program to be generated
● Automatic
Automatic generation of program names
PL Machining plane
Milling direction ● Climbing
● Conventional
RP Retraction plane
SC Safety clearance
F Feedrate
Parameter Description
Machining ● Face C
surface
● Face Y
(only for Shop‐
● Face B
Turn)
● Peripheral surface C
● Peripheral surface Y
Clamp/release spindle (only for end face Y/B and peripheral surface Y)
The function must be set up by the machine manufacturer.
(only for Shop‐
Turn)
598
1. The part program or ShopTurn program to be processed has been cre‐
ated and you are in the editor.
2. Press the "Milling", "Contour milling" and "Spigot" softkeys.
The "Mill spigot" input window opens.
3. Select the "Roughing" machining type.
● Complete
mm
mm
mm/min
ShopTurn program parameters
T Tool name
D Cutting edge number
F Feedrate
S / V Spindle speed or constant cutting
rate
Operating Manual, 06/2019, A5E44903486B AB
mm/min
mm/tooth
rpm
m/min
Unit
Turning