Teaching in a program
19.5 Settings for teach-in
19.5
Settings for teach-in
In the "Settings" window, you define which axes are to be included in the teach-in block and
whether motion-type and continuous-path mode parameters are to be provided.
Procedure
902
1.
Teach-in mode is active.
2.
Press the ">>" and "Settings" softkeys.
The "Settings" window opens.
3.
Under "Axes to be taught" and "Parameters to be taught", select the
check boxes for the desired settings.
4.
Press the "Accept" softkey to confirm the settings.
Operating Manual, 06/2019, A5E44903486B AB
Turning