Siemens SINUMERIK 840D sl Turning Operating Manual page 236
Hide thumbs
Also See for SINUMERIK 840D sl Turning:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Simulating machining
7.1 Overview
appropriate zero offset for the main spindle - or where relevant for the counterspindle - from the
specified chuck dimensions.
Programmable frames
All frames and zero offsets are taken into account in the simulation.
Note
Manually swiveled axes
Note that swivel movement in simulation and during simultaneous recording is also displayed
when the axes are swiveled manually at the start.
Display of the traversing paths
The traversing paths of the tool are shown in color. Rapid traverse is red and the feedrate is
green.
Note
Displaying the tailstock
The tailstock is only visible with the option "ShopMill/ShopTurn".
References
SINUMERIK Operate (IM9) / SINUMERIK 840D sl Commissioning Manual
236
Machine manufacturer
Please also refer to the machine manufacturer's specifications.
Operating Manual, 06/2019, A5E44903486B AB
Turning
Advertisement
Table of Contents
