Siemens SINUMERIK 840D sl Turning Operating Manual page 285

Display of the machining times
Display
Light green background Measured machining time of the program block (automatic mode)
Green background
Light blue background
Blue background
Yellow background
Highlighting of selected G code commands or keywords
In the program editor settings, you can specify whether selected G code commands are to be
highlighted in color. The following colors are used as standard:
Display
Blue font
Red font
Green font
Blue-green font
Gray font
Synchronization of programs on multi-channel machines
Special commands (e.g. GET and RELEASE) are used on multi-channel machines to
synchronize the programs. These commands are marked with a clock symbol.
Turning
Operating Manual, 06/2019, A5E44903486B AB
Meaning
Measured machining time of the program group (automatic mode)
Estimated machining time of the program block (simulation)
Estimated machining time of the program block (simulation)
Wait time (automatic mode or simulation)
Meaning
D, S, F, T, M and H functions
"G0" motion command
"G1" motion command
"G2" or "G3" motion command
Comment
Machine manufacturer
You can define further highlight colors in the "sleditorwidget.ini" configuration file.
Please refer to the machine manufacturer's specifications.
Creating a ShopTurn program
9.2 Program views
285