Enlarging Or Reducing The Cad Drawing - Siemens SINUMERIK 840D sl Turning Operating Manual
Hide thumbs
Also See for SINUMERIK 840D sl Turning:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Machining the workpiece
6.11 Working with DXF files
Requirement
The DXF file is open in the Program Manager or in the editor.
Procedure
6.11.2.3
Enlarging or reducing the CAD drawing
Requirement
The DXF file is opened in the Program Manager.
Procedure
192
1.
Press the "Clean" and "Layer selection" softkeys if you want to hide spe‐
cific layers.
The "Layer Selection" window opens.
2.
Deactivate the required layers and press the "OK" softkey.
- OR -
Press the "Clean automat." softkey to hide all non-relevant layers.
3.
Press the "Clean automat." softkey to redisplay the layers.
1.
Press the "Details" and "Zoom +" softkeys if you wish to enlarge the size
of the segment.
- OR -
2.
Press the "Details" and "Zoom -" softkeys if you wish to reduce the size of
the segment.
- OR -
Operating Manual, 06/2019, A5E44903486B AB
Turning
Advertisement
Table of Contents
