Tool Details; Displaying Tool Details; Tool Data - Siemens SINUMERIK 840D sl Turning Operating Manual
Hide thumbs
Also See for SINUMERIK 840D sl Turning:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
13.9
Tool details
13.9.1
Displaying tool details
The following parameters of the selected tool can be displayed using softkeys in the "Tool
Details" window.
● Tool data
● Cutting edge data
● Monitoring data
Procedure
...
13.9.2
Tool data
The "Tool Details" window provides the following data on the selected tool when the "Tool data"
softkey is active.
Turning
Operating Manual, 06/2019, A5E44903486B AB
1.
The tool list, the wear list, the OEM tool list or the magazine is open.
2.
Position the cursor to the desired tool.
3.
If you are in the tool list or in the magazine, press the ">>" and "Details"
softkeys.
- OR -
If you are in the wear list or OEM tool list, press the "Details" softkey.
The "Tool Details" window opens.
All of the available tool data are displayed.
4.
Press the "Cutting edge data" softkey if you wish to display the cutting
edge data.
5.
Press the "Monitoring data" softkey if you want to display the monitoring
data.
Tool management
13.9 Tool details
753
Advertisement
Table of Contents
