Siemens SINUMERIK 840D sl Turning Operating Manual page 619
Hide thumbs
Also See for SINUMERIK 840D sl Turning:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Orientation tolerance
You can enter the orientation tolerance for applications on machines with the dynamic multi-
axis orientation transformation (TRAORI).
MD note
Additional G commands that are available for use in machining free-form surfaces, are also
activated in the High Speed Settings cycle.
When deselecting CYCLE832, the G groups are programmed to the settings - during the
program run time - that are declared in the machine data for the reset state.
Further information
You can find further information on the "High Speed Settings" (CYCLE832) function here:
● SINUMERIK Operate Commissioning Manual
● Programming Manual, Job Planning
See also
G functions for mold making (Page 216)
Procedure
Turning
Operating Manual, 06/2019, A5E44903486B AB
1.
The part program or ShopTurn program to be processed has been cre‐
ated and you are in the editor.
2.
Select the "Miscellaneous" softkey.
3.
Press the "High Speed Settings" softkey.
The "High Speed Settings" input window is opened.
4.
Press the "Default values" softkey if you want to store default values for
axis tolerance values depending on the machining.
Programming technology functions (cycles)
10.6 Further cycles and functions
619
Advertisement
Table of Contents
