Starting And Stopping The Spindle Manually - Siemens SINUMERIK 840D sl Turning Operating Manual
Hide thumbs
Also See for SINUMERIK 840D sl Turning:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Working in manual mode
5.2 Selecting a tool and spindle
5.2.3
Starting and stopping the spindle manually
Procedure
Note
Changing the spindle speed
If you enter the speed in the "Spindle" field while the spindle is rotating, the new speed is
applied.
140
7.
Press the <CYCLE START> key.
The tool is automatically swung into the machining position and the name
of the tool displayed in the tool status bar.
1.
Select the "T,S,M" softkey in the "JOG" mode.
2.
Select the desired spindle (e.g. S1) and enter the desired spindle speed
or cutting speed in the right-hand entry field.
3.
If the machine has a gearbox for the spindle, set the gearing step.
4
Select a spindle direction of rotation (clockwise or counterclockwise) in
the "Spindle M function" field.
5.
Press the <CYCLE START> key.
The spindle rotates.
6.
Select the "Stop" setting in the "Spindle M function" field.
Press the <CYCLE START> key.
The spindle stops.
Operating Manual, 06/2019, A5E44903486B AB
Turning
Advertisement
Table of Contents
