Siemens SINUMERIK 840D sl Turning Operating Manual page 614

Programming technology functions (cycles)
10.6 Further cycles and functions
If milling is to be possible on any swiveled machining plane, then the "swivel plane" function
must be used.
Procedure
Parameter Description
TC Name of swivel data set
Retract No
ZR Retraction path - (only for incremental retraction in the tool direction)
β Rotation around the 3rd geometry axis (for G18 Y)
γ Rotation around the turning tool
Tool Tool tip position when swiveling
614
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1. The part program to be executed has been created and you are in the
editor.
2. Select the "Miscellaneous" softkey.
3. Press the "Swivel tool" and "Align turning tool" softkeys.
The "Align turning tool" input window opens.
No retraction before swiveling
Incremental retraction in tool direction
The retraction path is entered into parameter ZR.
Maximum retraction in tool direction
Retraction in the direction of machine axis Z
Follow up
The position of the tool tip is maintained during swiveling.
No follow up
The position of the tool tip changes during swiveling.
Operating Manual, 06/2019, A5E44903486B AB
Unit
Degrees
Degrees
Turning