Siemens SINUMERIK 840D sl Turning Operating Manual page 338

Creating a ShopTurn program
9.19 Example: Standard machining
13. Positioning
14. Milling the rectangular pocket
338
3. Enter the following parameters:
Machined surface
Drilling depth
Z1
DT
4. Press the "Accept" softkey.
1. Press the "Drilling", "Positions" and "Freely Programmable Positions"
softkeys.
The "Positions" input window opens.
2. Enter the following parameters:
Machined surface
Coordinate system
Z0
C0
L0
C1
L1
C2
L2
C3
L3
3. Press the "Accept" softkey.
1. Press the "Milling", "Pocket" and "Rectangular pocket" softkeys.
The "Rectangular Pocket" input window opens.
2. Enter the following technology parameters:
T Miller_D8
3. Enter the following parameters:
Face C
Tip
10 inc
0 s
Face C
Polar
0 abs
0 abs
16 abs
90 abs
16 abs
180 abs
16 abs
270 abs
16 abs
D1 F 0.030 mm/tooth
Operating Manual, 06/2019, A5E44903486B AB
V 200 m/min
Turning