Siemens SINUMERIK 840D sl Turning Operating Manual page 546

Programming technology functions (cycles)
10.4 Milling
Additional supplementary conditions
● Finishing
1/2 slot width W ≤ milling cutter diameter
● Edge finishing
Finishing allowance UXY ≤ milling cutter diameter
● Chamfering
The tip angle must be entered into the tool table.
Procedure
Parameters in the "Input complete" mode
G code program parameters
Input
PL Machining plane
RP Retraction plane
SC Safety clearance
F Feedrate
546
1. The part program or ShopTurn program to be processed has been cre‐
ated and you are in the editor.
2. Press the "Milling" softkey.
3. Press the "Slot" and "Open slot" softkeys.
The "Open slot" input window opens.
● Complete
mm
mm
*
ShopTurn program parameters
T Tool name
D Cutting edge number
F Feedrate
S / V Spindle speed or constant cutting
rate
Operating Manual, 06/2019, A5E44903486B AB
mm/min
mm/tooth
rpm
m/min
Turning