Storing Any New File - Siemens SINUMERIK 840D sl Operating Manual

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

Storing any new file

In each directory or subdirectory you can create a file in any format that you specify.

File extensions

In the NC memory, the extension must have 3 characters, and DIR or WPD are not

In the NC memory, you can create the following file types under a workpiece using the "Any"

Operating Manual, 03/2013, 6FC5398-7CP40-3BA1

12.4 Creating a directory / program / job list / program list

Select the "Program manager" operating area.

Select the desired storage location and position the cursor on the folder

in which you would like to create the file.

Press the "New" and "Any" softkeys.

The "Any New Program" window appears

Select a file type from the "Type" selection field (for example,

"Definitions GUD") and enter the name of the file to be created when

you have selected a workpiece directory in the NC memory.

The file automatically has the selected file format.

Managing programs

Sinumerik 828d