Creating Screenshots - Siemens SINUMERIK 840D sl Turning Operating Manual

15.5

Creating screenshots

You can create screenshots of the current user interface.
Each screenshot is saved as a file and stored in the following folder:
/user/sinumerik/hmi/log/screenshot
Procedure
Ctrl + P
Copy file
Note
WinSCP (840D sl only)
You can also copy the screenshots to a Windows PC using "WinSCP".
Note
Open files (840D sl only)
Open the files in SINUMERIK Operate to view the screenshots. On a Windows PC, you can
open the files using a graphic program such as "Office Picture Manager".
Turning
Operating Manual, 06/2019, A5E44903486B AB
Press the "Ctrl + P" key combination.
A screenshot of the current user interface is created in .png format.
The file names assigned by the system are in ascending order from
"SCR_SAVE_0001.png" to "SCR_SAVE_9999.png". You can create up to 9,999
screenshots.
1. Select the "Setup" operating area.
2. Press the "System data" softkey.
3. Open the folder specified above, and select the required screenshots.
4. Press the "Copy" softkey.
- OR -
Press the "Cut" softkey.
5. Open the required archive directory, e.g. on a USB flash drive and press
the "Paste" softkey.
Alarm, error and system messages
15.5 Creating screenshots
841