Siemens SINUMERIK 840D sl Turning Operating Manual page 356

Programming technology functions (cycles)
10.1 Drilling
6. Retraction with G0 to the safety clearance of the reference point.
7. Retraction to retraction plane with G0 to drilling position in the two axes of the plane
(coordinates of the hole center point).
Procedure
Parameters, G code program
PL Machining plane
RP Retraction plane
SC Safety clearance
Parameter Description
Machining
● Single position
position
Drill hole at programmed position.
● Position pattern
Position with MCALL
(only for G code)
DIR Direction of rotation
●
●
(only for G code)
Z0 (only for G Reference point Z
code)
356
1. The part program or ShopTurn program to be processed has been cre‐
ated and you are in the editor.
2. Press the "Drilling" softkey.
3. Press the softkey "Boring" for G code.
- OR -
3. Press the softkeys "Drilling Reaming" and "Boring" for ShopTurn
The "Boring" input window opens.
mm
mm
Parameters, ShopTurn program
T Tool name
D Cutting edge number
F Feedrate
S / V Spindle speed or constant cutting
rate
Operating Manual, 06/2019, A5E44903486B AB
mm/min
mm/rev
rpm
m/min
Unit
mm
Turning