Parameters - Siemens SINUMERIK 840D sl Turning Operating Manual

Programming technology functions (cycles)
10.6 Further cycles and functions
10.6.3.1

Parameters

Parameter Description
Machining
● ∇ (roughing)
● ∇∇ (semi-finishing)
● ∇∇∇ (finishing/speed)
● ∇∇∇∇ (fine finishing/precision)
● Deselection
Mold-making
● Advanced Surface
function
● Top Surface
Note
The field can be hidden.
Please observe the information provided by the machine manufacturer.
Contour tolerance ● Input of the maximum allowance from the programmed contour.
● Standard default values depending on the type of machining via the "Default
values" softkey:
–
–
–
–
Note
The default values may have been changed by the manufacturer.
Please observe the information provided by the machine manufacturer.
Smoothing (not
● Yes
for "Advanced
Optimized path within the contour tolerance
Surface")
● No
Path close to contour
Note
The field can be hidden.
Please observe the information provided by the machine manufacturer.
620
∇ (roughing): 0.100
∇∇ (semi-finishing): 0.050
∇∇∇ (finishing/speed): 0.010
∇∇∇∇ (fine finishing/precision): 0.005
Operating Manual, 06/2019, A5E44903486B AB
Unit
Turning