Siemens SINUMERIK 840D sl Turning Operating Manual page 359

6. Approach of the last drilling depth with G0, reduced by the clearance distance V3.
7. Drilling is then continued to the next drilling depth.
8. Steps 4 to 7 are repeated until the programmed final drilling depth Z1 is reached.
9. Dwell time at final drilling depth.
10.The tool retracts to the retraction plane at rapid traverse.
Procedure
Parameters in the "Input complete" mode
G code program parameters
Input
PL Machining plane
RP Retraction plane
SC Safety clearance
Parameter Description
Machining posi‐
● Single position
tion (only for G
Drill hole at programmed position
code)
● Position pattern (MCALL)
Position with MCALL
Machining ● Face C
surface
● Face Y
● Peripheral surface C
(only for Shop‐
● Peripheral surface Y
Turn)
Turning
Operating Manual, 06/2019, A5E44903486B AB
1. The part program or ShopTurn program to be processed has been cre‐
ated and you are in the editor.
2. Press the "Drilling" softkey.
3. Press the "Deep-hole drilling" and "Deep-hole drilling 1" softkeys.
The "Deep-hole drilling 1" input window opens.
● Complete
mm
mm
Programming technology functions (cycles)
ShopTurn program parameters
T Tool name
D Cutting edge number
F Linear feedrate
Feedrate per revolution
S / V Spindle speed or
Constant cutting rate
10.1 Drilling
mm/min
mm/rev
rpm
m/min
Unit
359