Siemens SINUMERIK 840D sl Turning Operating Manual page 510

Programming technology functions (cycles)
10.4 Milling
Parameter Description
Machining posi‐ ● Single position
tion
Mill rectangular pocket at the programmed position (X0, Y0, Z0).
● Position pattern
Position with MCALL
The positions refer to the reference point:
X0 Reference point X – (only for single position)
Y0 Reference point Y – (only for single position)
Z0 Reference point Z
(only for G code)
Face C: The positions refer to the reference point:
X0 or L0 Reference point X or reference point length polar – (only for single position)
Y0 or C0 Reference point Y or reference point angle polar – (only for single position)
Z0 Reference point Z – (only for single position)
(only for Shop‐
Turn)
Face Y: The positions refer to the reference point:
CP Positioning angle for machining area – (only single position)
Angle CP does not have any effect on the machining position in relation to the workpiece.
It is only used to position the workpiece with the rotary axis C in such a way that machining
is possible on the machine.
X0 or L0 Reference point X or reference point length polar – (only for single position)
Y0 or C0 Reference point Y or reference point angle polar – (only for single position)
Z0 Reference point Z – (only for single position)
(only for Shop‐
Turn)
Peripheral surface C: The positions refer to the reference point:
Y0 or C0 Reference point Y or reference point angle polar – (only for single position)
Z0 Reference point Z – (only for single position)
X0 Cylinder diameter ∅ – (only for single position)
(only for Shop‐
Turn)
Peripheral surface Y: The positions refer to the reference point:
C0 Positioning angle for machining surface – (only for single position)
Y0 Reference point Y – (only for single position)
Z0 Reference point Z – (only for single position)
X0 Reference point X – (only for single position)
(only for Shop‐
Turn)
W Width of spigot
L Length of spigot
R Corner radius
α0 Angle of rotation
Z1 Spigot depth (abs) or depth relative to Z0 or X0 (inc) - (only for ∇ and ∇∇∇)
510
Operating Manual, 06/2019, A5E44903486B AB
Unit
mm
mm
mm
mm
mm
mm
Degrees
mm
mm or de‐
grees
mm
mm or de‐
grees
mm
mm
Degrees
mm
mm
mm
mm
mm
mm
Degrees
mm
Turning