Siemens SINUMERIK 840D sl Turning Operating Manual page 215

Group
G group 7
G group 8
G group 9
G group 10
G group 13
G group 14
G group 15
G group 16
G group 21
G group 22
G group 29
G group 30
Procedure
...
The G groups selection displayed in the "G Functions" window may differ.
Further information
Further information about configuring the displayed G groups can be found in the SINUMERIK
Operate Commissioning Manual.
Turning
Operating Manual, 06/2019, A5E44903486B AB
Meaning
Tool radius compensation (e.g. G40, G42)
Settable work offset (e.g. G54, G57, G500)
Offset suppression (e.g. SUPA, G53)
Exact stop - continuous-path mode (e.g. G60, G641)
Workpiece dimensioning inches/metric (e.g. G70, G700)
Workpiece dimensioning absolute/incremental (G90)
Feedrate type (e.g. G93, G961, G972)
Feedrate override on inside and outside curvature (e.g. CFC)
Acceleration profile (e.g. SOFT, DRIVE)
Tool offset types (e.g. CUT2D, CUT2DF)
Radius/diameter programming (e.g. DIAMOF, DIAMCYCOF)
Compressor ON/OFF (e.g. COMPOF)
1. Select the "Machine" operating area.
2. Press the <JOG>, <MDI> or <AUTO> key.
3. Press the "G functions" softkey.
The "G Functions" window is opened.
4. Press the "G functions" softkey again to hide the window.
Machine manufacturer
Please observe the information provided by the machine manufacturer.
6.13 Displaying G functions and auxiliary functions
Machining the workpiece
215