New File/New Directory; Loading And Unloading - Siemens SINUMERIK 840Di sl Operating Manual

7
01/2008

7.2.1 New file/new directory

Manage
data
New...
OK

7.2.2 Loading and unloading

Manage
data
Load
HD->NC
Unload
NC->HD
© Siemens AG 2008 All rights reserved.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
Sequence of operations
Press the "Manage data" softkey.
The horizontal and vertical softkey bars change.
The "New" window appears.
Enter a new file name.
If the pre-assigned file type does not match, use the "End" key to
switch between input field "Name" and "File type".
Select the new file type.
The new directory/file is set up in the directory overview.
Sequence of operations
Press the "Manage data" softkey.
The horizontal and vertical softkey bars change.
Position the cursor on the desired file.
The selected file is deleted from the hard disk and loaded to the
NC memory. In the display the entry "X" = loaded is added to the file.
See also Chapter "Job list".
The selected file is deleted from the NC memory and loaded to the
hard disk. In the display, the entry " " = not loaded is added to the file.
If you want to "load/unload" a workpiece directory and
a job list with the name of the directory exists in the job list, that job list
is executed.
If a job list does not exist, all the files in that directory are
loaded/unloaded.
Services operating area
7.2 Managing data
7
7-367