Creating A Program Block - Siemens SINUMERIK 840D sl Turning Operating Manual

Multi-channel machining
11.2 Multi-channel support
Procedure
11.2.5.4

Creating a program block

In order to structure programs in order to achieve a higher degree of transparency when
preparing for the synchronized view, you have the possibility of combining several blocks (G
code and/or ShopTurn machining steps) to form program blocks.
Structuring programs
● Before generating the actual program, generate a program frame using empty blocks.
● By forming blocks, structure existing G code or ShopTurn programs.
①
②
③
④
⑤
⑥
Figure 11-1
684
1. The ShopTurn program has been created.
2. Position the cursor at the location in the program where settings
must be changed.
3. Press the "Various" and "Settings" softkeys.
The "Settings" input window opens.
Cross-channel data from the "Multi-channel data" window.
"MULTI-CHANNEL PROGRAMS_1" program opened in channel 1.
"MULTI-CHANNEL PROGRAMS_2" program opened in channel 2.
Actual program with block name "Stock removal".
The program block has been opened and an Addit. run-in code has been activated.
The program block is assigned to the main spindle.
Program block with block name "Peripheral surface".
The program block is closed. In order to identify whether an Addit. run-in code is activated or
automatic retraction is activated, open the block using the <Cursor right> key.
Program block with block name "Face milling".
The program block is assigned to the counter-spindle. The spindle assignment is color coded in
order to make a distinction.
Structured programs in the multi-channel editor
Operating Manual, 06/2019, A5E44903486B AB
Turning