Siemens SINUMERIK 840D sl Turning Operating Manual page 812

Managing programs
14.13 Viewing PDF documents
Changing the display
Copying text
Opening a PDF
You have the option of opening another PDF without exiting the PDF display.
812
7. Press the "Continue search" softkey if the text that is found is not the
specific text that you are looking for.
8. Press the "Back" softkey to return to the higher-level softkey bar.
1. Press the "View" softkey to change the representation of the PDF.
A new vertical softkey bar appears.
2. Press the "Zoom page width" softkey to display the document in full width
on the screen.
- OR -
Press the "Zoom page length" softkey to display the document with full
height on the screen.
- OR -
Press the "Rotate left" softkey to rotate the document through 90 degrees
to the left.
- OR -
Press the "Rotate right" softkey to rotate the document through 90 de‐
grees to the right.
3. Press the "Back" softkey to return to the higher-level softkey bar.
1. Press the "Mark" softkey.
The "Copy" softkey can be used.
2. Select the required text either by touching or with the mouse.
3. Press the "Copy" softkey.
"The marked text is available for insertion in the editor"
4. Press the "Mark" softkey again to shift the displayed section by touching.
The "Copy" softkey cannot be used.
1. Press the ">>" and "Open" softkeys.
2. Select the required storage location, and position the cursor on the PDF
that you wish to display.
Operating Manual, 06/2019, A5E44903486B AB
Turning