Siemens SINUMERIK 840D sl Turning Operating Manual page 207
Hide thumbs
Also See for SINUMERIK 840D sl Turning:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
There are no gaps in the numbering within the range.
Procedure
Display comments
Delete R variables
Turning
Operating Manual, 06/2019, A5E44903486B AB
Machine manufacturer
Please observe the information provided by the machine manufacturer.
1.
Select the "Parameter" operating area.
2.
Press the "User variable" softkey.
3.
Press the "R variables" softkey.
The "R parameters" window appears.
1.
Press the ">>" and "Display comments" softkeys.
The "R parameters with comments " window opens.
2.
Press the "Display comments" softkey once again to return to the "R
parameters" window.
1.
Press the ">>" and "Delete" softkeys.
The "Delete R parameters" window appears.
2.
In fields "from R parameters" and "to R parameters", select the R param‐
eters whose values you wish to delete.
- OR -
Press the "Delete all" softkey.
3.
Activate the checkbox "also delete comments" if the associated com‐
ments should also be automatically deleted.
4.
Press the "OK" softkey.
● A value of 0 is assigned to the selected R parameters or to all R
parameters.
● The selected comments are also deleted.
Machining the workpiece
6.12 Display and edit user variables
207
Advertisement
Table of Contents
