Siemens SINUMERIK 840D sl Turning Operating Manual page 478

Programming technology functions (cycles)
10.3 Contour turning
For more detailed information, please refer to section "Stock removal".
Procedure
Parameters in the "Input complete" mode
G code program parameters
Input
PRG
● Name of the program to be generated
● Auto
Automatic generation of program names
PL Machining plane
RP Retraction plane – (only for
machining direction, longitu‐
dinal, inner)
SC Safety clearance
Residual With subsequent residual material removal
material
● Yes
● No
CONR Name to save the updated unmachined-part
contour for residual material removal - (only
"Yes" for residual material removal)
Parameter Description
FX (only ShopTurn) Feedrate in X direction
FZ (only ShopTurn) Feedrate in Z direction
FX (only G Code) Feedrate in X direction
FZ (only for G code) Feedrate in Z direction
Machining
● ∇ (roughing)
● ∇∇∇ (finishing)
● ∇+∇∇∇ (complete machining)
Machining
● Face
direction
● Longitudinal
478
1. The part program or ShopTurn program to be processed has been cre‐
ated and you are in the editor.
2. Press the "Contour turning" softkey.
3. Press the "Plunge turning" softkey.
The "Plunge turning" input window opens.
● Complete
mm
mm
ShopTurn program parameters
T Tool name
D Cutting edge number
S / V Spindle speed or constant cutting
rate
Operating Manual, 06/2019, A5E44903486B AB
rpm
m/min
Unit
mm/rev
mm/rev
*
*
Turning