Filtering The Tool Management Lists - Siemens SINUMERIK 840D sl Turning Operating Manual
Hide thumbs
Also See for SINUMERIK 840D sl Turning:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Tool management
13.11 Filtering the tool management lists
13.11
Filtering the tool management lists
The filter function allows you to filter-out tools with specific properties in the tool management
lists.
For instance, you have the option of displaying tools during machining that have already
reached the prewarning limit in order to prepare the corresponding tools for equipping.
Filter criteria
● Only display the first cutting edge
● Only tools that are ready to use
● Only tools with active code
● Only tools that have reached the prewarning limit
● Only locked tools
● Only tools with remaining quantity of ... to ...
● Only tools with residual tool life of ... to ...
● Only tools with unloading marking
● Only tools with loading marking
Note
Multiple selection
You have the option of selecting several criteria. You will receive an appropriate message if
conflicting filter options are selected.
You can configure OR logic operations for the various filter criteria.
References
A description of the configuration options is provided in
SINUMERIK Operate (IM9) / SINUMERIK 840D sl Commissioning Manual
758
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Operating Manual, 06/2019, A5E44903486B AB
Turning
Advertisement
Table of Contents
