Siemens SINUMERIK 840D sl Turning Operating Manual page 382

Programming technology functions (cycles)
10.1 Drilling
Procedure
Parameters, G code program
PL Machining plane
RP Retraction plane
SC Safety clearance
Parameters Description
Machining posi‐
● Single position
tion
Drill hole at programmed position
(only for G code)
● Position pattern
Position with MCALL
F1 Drilling feedrate
(only for G code)
Z0 Reference point Z
(only for G code)
Machining
● Face C
surface
● Face Y
(only for Shop‐
● Peripheral surface C
Turn)
● Peripheral surface Y
Position
● At the front (face)
(only for Shop‐
● At the rear (face)
Turn)
● Outside (peripheral surface)
● Inside (peripheral surface)
Clamp/release spindle (only for end face Y/peripheral surface Y)
The function must be set up by the machine manufacturer.
(only for Shop‐
Turn)
Z1 Thread length (inc) or end point of the thread (abs)
382
1. The part program or ShopTurn program to be processed has been cre‐
ated and you are in the editor.
2. Press the "Drilling" softkey.
3. Press the "Thread" and "Cut thread" softkeys.
The "Drilling and thread milling" input window opens.
mm
mm
Parameters, ShopTurn program
T Tool name
D Cutting edge number
F Feedrate
S / V Spindle speed or constant cutting
rate
Operating Manual, 06/2019, A5E44903486B AB
mm/min
mm/rev
rpm
m/min
Unit
mm/min
mm/rev
mm
mm
Turning