Q3920 EOT 3G TO 4G CONVERSION
_________________________________________________________________________________________________________
1.3
Procedure to Upgrade 9VA88 Software in the Q3920 EOT
1.3.1
PUMP Utility Configuration
Open the 16371 Product Upgrade Monitor Program (PUMP) utility on the test PC.
Figure 1-9 Product Upgrade Monitor Program (PUMP) Utility Screen
Upon opening, if all the buttons shown in the above screenshot are not displaying on the 16371
screen, then the user will need to perform the following steps to enable the extra functions.
1. Exit the 16371 program.
2. Go to the Windows start menu and select "run". The window below should display.
3. In the Run window type "regedit". The registry editor should display.
OBE-00-22-01
Version No.: A.1
Figure 1-10 Run Window
1-10
JANUARY 2022