Selecting A Program - Siemens SINUMERIK 840D sl Operating Manual

4.2

Selecting a program

Procedure
Universal
Operating Manual, 02/2011, 6FC5398-6AP40-0BA0
1. Select the "Program manager" operating area.
The directory overview is opened.
2. Place the cursor on the directory containing the program that you want
to select.
3. Press the <INPUT> key
- OR -
Press the <Cursor right> key.
The directory contents are displayed.
4. Place the cursor on the desired program.
5. Press the "Select" softkey.
The program is selected.
When the program has been successfully selected, an automatic
changeover to the "Machine" operating area occurs.
Machine the workpiece
4.2 Selecting a program
91