Advertisement
4.6
Ending the Emulator
When using the toolchain, the emulator can be exited by using the following two methods:
• Canceling the connection of the emulator being activated
• Exiting the High-performance Embedded Workshop
(1) Canceling the connection of the emulator being activated
Select [Disconnect] from the [Debug] menu or click the [Disconnect] toolbar button (
(2) Exiting the High-performance Embedded Workshop
Select [Exit] from the [File] menu.
A message box is displayed. If necessary, click the [Yes] button to save a session. After
saving a session, the High-performance Embedded Workshop exits. If not necessary, click the
[No] button to exit the High-performance Embedded Workshop.
Figure 4.22 [Session has been modified] Message Box
Section 4 Preparations for Debugging
Rev. 1.00 Nov. 26, 2007 Page 77 of 230
REJ10J1766-0100
).
Advertisement
Troubleshooting
