Advertisement
Section 6 Tutorial
6.17
Break Function
The emulator has PC and hardware break functions. With the High-performance Embedded
Workshop, a PC breakpoint can be set using the [Breakpoint] sheet of the [Event] window, and a
hardware break condition can be set using the [Event condition] sheet.
An overview and setting of the break function are described below.
6.17.1 PC Break Function
The emulator can set up to 255 PC breakpoints. Other methods for setting a PC breakpoint than in
section 6.7, Setting a PC Breakpoint, are described below.
• Select [Eventpoints] from the [Code] submenu of the [View] menu in the High-performance
Embedded Workshop for CPU1. The [Event] window is displayed.
• Select the [Breakpoint] sheet.
Figure 6.31 [Event] Window (Before PC Breakpoint Setting)
Rev. 1.00 Nov. 26, 2007 Page 176 of 230
REJ10J1766-0100
Advertisement
Troubleshooting
