Advertisement
Table 2.1 Emulator Functions (cont)
No.
Item
5
Performance
measurement function
6
Memory access functions
7
General/control register
access function
8
Internal I/O register
access function
9
Source-level debugging
function
10
Command line function
11
Help function
Note: The [IO] window displays the contents defined in [SHxxxx.io]. Editing those contents adds
or deletes the registers to be displayed. For the contents to be described as [SHxxxx.io],
refer to reference 5, I/O File Format, in the High-performance Embedded Workshop V.4.00
User's Manual.
The following directory contains [SHxxxx.io] (xxxx means the name of emulator device
group.):
<High-performance Embedded Workshop folder>:
\Tools\Renesas\DebugComp\Platform\E10A-USBM\xxxx\IOFiles
The specific functions of the emulator are described in the next section.
Function
•
Uses a counter in the device to measure the number of
cycles that passes during point-to-point execution.
•
Downloading to RAM
•
Downloading to flash memory
•
Single-line assembly
•
Reverse assembly (disassembly)
•
Reading of memory
•
Writing to memory
•
Automatic updating of a display of selected variables during
user program execution
•
Fill
•
Search
•
Move
•
Copy
•
Monitor (physical address)
•
Reads or writes the general/control registers.
•
Reads or writes the internal I/O registers.*
•
Various source-level debugging functions.
•
Supports command input.
•
Batch processing is enabled when a file is created by
arranging commands in input order.
•
Describes the usage of each function or command syntax
input from the command line window.
Section 2 Emulator Functions
Rev. 1.00 Nov. 26, 2007 Page 9 of 230
REJ10J1766-0100
Advertisement
Troubleshooting
