Advertisement
[Auto-Refresh at rate]:
[Reading the Initial Value]:
[Color]:
[Change Indicator]:
[Foreground]:
[Background]:
[Mayfly]:
[Detail]:
Not supported in the emulator.
[History]:
Displays the previous settings.
Note: Selection of the foreground or background color may not be available depending on the
operating system in use.
After setting, clicking the [OK] button displays the [Monitor] window.
Sets the interval for acquisition by monitoring.
Selects reading of the values in the monitored area when the
monitor window is opened.
Sets the method to update monitoring and the attribute of colors.
Selects how to display the values that have changed during
monitoring (available when [Reading the Initial Value] has
been selected).
No change: No color change.
Change: Color is changed according to the [Foreground] and
[Background] options.
Gray: Those data with values that have not been changed are
displayed in gray.
Appear: A value is only displayed after changed.
Sets the color used for display (available when [Change] has
been selected).
Sets the background color (available when [Change] has been
selected).
A check in this box selects restoration of the color of those
data which have not been updated in a specified interval to the
color selected in the [Background] option. The specified
interval is the interval for monitor acquisition (available when
[Change], [Gray], or [Appear] has been selected).
Section 5 Debugging
Rev. 1.00 Nov. 26, 2007 Page 95 of 230
REJ10J1766-0100
Advertisement
Troubleshooting
