Advertisement
Debugger Options] dialog box. The setting for using the emulator has been registered in this
session file.
After selected, the emulator is automatically connected.
4.1.3
Selecting an Existing Workspace
1. In the [Welcome!] dialog box that is displayed when the High-performance Embedded
Workshop is activated, select [Browse to another project workspace] radio button and click the
[OK] button.
2. The [Open Workspace] dialog box is displayed. Select a directory in which you have created a
workspace.
After that, select the workspace file (.hws) and press the [Open] button.
Figure 4.11 [Welcome!] Dialog Box
Section 4 Preparations for Debugging
Rev. 1.00 Nov. 26, 2007 Page 65 of 230
REJ10J1766-0100
Advertisement
Troubleshooting
