Cd-R - Renesas HS0005KCU04HE User Manual

3.3

CD-R

The root directory of the CD-R contains a setup program for installing the emulator's software.
The folders contain the files and programs listed below.
Table 3.1 Contents of the CD-R Directories
Directory Name Contents
Dlls Microsoft
Drivers E10A-USB Multi emulator
driver
Help Online help for the E10A-USB
Multi emulator
Manuals E10A-USB Multi emulator
manuals
3.4 Installing Emulator's Software
Follow the cues given by the installation manager to install the software.
The two of separated High-performance Embedded Workshop for the CPU0 and CPU1 will be needed to
install.
(1) Install the High-performance Embedded Workshop for the CPU0. Activate the
HewInstMan.exe from the CD-R root directory, start up the installation manager and select the
[Install the HEW to another directory], select the [change] button from the installation
destination and name the folder name. Perform the Install following the Installation manager.
(2) Install the High-performance Embedded Workshop for the CPU1. Activate the
HewInstMan.exe from the CD-R root directory, start up the installation manager and select the
[Install the HEW to another directory], select the [change] button from the installation
destination and name the folder name. Perform the Install following the Installation manager.
Note: When a driver is installed in Windows
test may be displayed, but it is not a problem. Select [Continue Anyway] to proceed with
driver installation.
®
runtime library
®
XP, a warning message on the Windows
Section 3 Preparation before Use
Description
A runtime library for the High-performance
Embedded Workshp. The version is checked
at installation and this library is copied to the
hard disk as part of the installation process.
USB drivers for the E10A-USB Multi emulator.
An online help file. This is copied to the hard
disk as part of the installation process.
E10A-USB Multi emulator user's manuals.
They are provided as PDF files.
Rev. 1.00 Nov. 26, 2007 Page 25 of 230
®
logo
REJ10J1766-0100