Opening The [Event] Window - Renesas HS0005KCU04HE User Manual

5.5.3

Opening the [Event] Window

Select [View -> Code -> Eventpoints] or click the [Eventpoints] toolbar button (
[Event] window.
The [Event] window has the following two sheets:
[Breakpoint] sheet:
[Event condition] sheet:
5.5.4 Setting PC Breakpoints
It is possible to display, modify, and add PC breakpoints on the [Breakpoint] sheet.
This window displays and sets the breakpoints. Items that can be displayed in the sheet are listed
below.
[Type] Breakpoint
[State] Whether the breakpoint is enabled or disabled
[Condition] An address that the breakpoint is set
Address = Program counter (Corresponding file name, line, and symbol name)
Displays the settings made for PC breakpoints. It is also possible to set,
modify, and cancel PC breakpoints.
Displays or sets the settings made for break condition channels.
Figure 5.14 [Event] Window ([Breakpoint] Sheet)
Section 5 Debugging
Rev. 1.00 Nov. 26, 2007 Page 101 of 230
) to open the
REJ10J1766-0100