Checking The Operation Of The Target Memory For Downloading - Renesas HS0005KCU04HE User Manual

Section 6 Tutorial
6.5

Checking the Operation of the Target Memory for Downloading

Check that the destination memory area for downloading is operating correctly.
When the destination memory is SDRAM or DRAM, a register in the bus controller of the MPU
must be set before downloading. Set the bus controller correctly in the [IO] window according to
the memory type to be used.
When the required settings, such as the settings for the bus controller, have been completed,
display and edit the contents of the destination memory in the [Memory] window in the High-
performance Embedded Workshop for CPU1 to check that the memory is operating correctly.
Note: The above way of checking the operation of memory may be inadequate. It is
recommended that a program for checking the memory be created.
• Select [Memory...] from the [CPU] submenu of the [View] menu and enter H'00000000,
H'00000000, and H'FFFFFFFF in the [Display address], [Scroll Start Address], and
[Scroll End Address] edit boxes, respectively.
• Click the [OK] button. The [Memory] window is displayed and shows the specified memory
area.
Rev. 1.00 Nov. 26, 2007 Page 150 of 230
REJ10J1766-0100
Figure 6.2 [Display Address] Dialog Box