Advertisement
Table B.1 GUI Menus (cont)
Menu
Option
Debug
Debug Sessions...
Debug Settings...
Reset CPU
Go
Reset Go
Go To Cursor
Set PC To Cursor
Run...
Step In
Step Over
Step Out
Step...
Toolbar
Shortcut
Button
F5
Shift + F5
F11
F10
Shift +
F11
Rev. 1.00 Nov. 26, 2007 Page 217 of 230
Appendix B Menus
Remarks
Opens the [Debug Sessions]
dialog box to list, add, or remove
the debug session.
Opens the [Debug Settings]
dialog box to set the debugging
conditions or download modules.
Resets the target hardware and
sets the PC to the reset vector
address.
Starts executing the user program
at the current PC.
Resets the target microcomputer
and executes the user program
from the reset vector address.
Starts executing the user program
at the current PC until the PC
reaches the address indicated by
the current text cursor position.
Sets the PC to the address at the
row of the text cursor.
Launches the [Run Program]
dialog box allowing the user to
enter the PC or PC breakpoint
during executing the user
program.
Executes a block of user program
before breaking.
Executes a block of user program
before breaking. If a subroutine
call is reached, then the
subroutine will not be entered.
Executes the user program to
reach the end of the current
function.
Launches the [Step Program]
dialog box allowing the user to
modify the settings for stepping.
REJ10J1766-0100
Advertisement
Troubleshooting
